| Customization: | Available |
|---|---|
| After-sales Service: | Free for Life |
| Warranty: | Free for Life |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
1. Guarantee/Warranty: 1 years
2.Price: Lower price with higher quality.
3.Machine Performance: Low break down rates, with long life.
4. Prompt Delivery: Short delivery time.
5.Quality : High quality get the approval of the customers.
6.Service: Good after service to guarantee you use the machine normally and sell your products well.
7.Small Orders Accepted
Cangzhou Dixin press tile machine metal outer wall panel forming machine technical parameters
A, metal carving plate production flow chart
2. Rolled products
Size: 400mm
Three, the main components of the metal carving plate production line technical description
(1).5T electric uncoiler
1. Inner diameter of material roll: ¢500mm; Diameter expansion and contraction range: ¢400--¢520mm
Technical description of main components
2.1 5T electric uncoiler
a. Inner diameter of material coil: ¢500mm; Diameter expansion and contraction range: ¢400--¢520mm
b. Maximum outer diameter of the material roll: ¢1200mm; Maximum load: 5T
(2) Embossing machine.
Structure form: The frame is composed of high quality steel plate welding, the roller is made of high quality 40Cr steel, the surface is tempered and chromium-plated, precision gear transmission, equipped with domestic brand motor, frequency converter speed regulation.
Features: The use of CNC engraving machine and professional flower roller hand engraving technicians to carve carefully, so that the pressed out of the color steel plate smooth, delicate pattern,
The layer is clear and the three-dimensional sense is strong, which ensures the beautiful effect of the double rolling of the wall board.
Technical parameters:
1. Overall size: 1800×1000 × 1200mm
2. Roller specification: 350×600mm
3, roller material: 40Cr steel
4, roll surface treatment: tempering, chrome plating
5, embossing speed: 0-16 m /min
6, motor power: 380V, 50HZ, 4KW motor
7, transmission mode: up and down precision gear transmission
8, pressure adjustment: British screw pressure
9, can be pressed thickness: color steel 0.2-0.5mm×500mm
(3), brick forming host
1. Use: Cold forming machine is used for cold bending deformation of sheet metal to the required profile.
2. Function and structure: the sheet material is rolled through the 18-component mold and gradually becomes the bottom plate required by the drawing. It is composed of cycloidal motor, chain drive, transverse adjusting mechanism and roller.
3. The roller adopts 45# steel, CNC machining after quenching as a whole, hardness up to HRC45-50°, with high strength, high hardness, high precision, high service life and other advantages.
4. Host frame: integral welding, CNC machining.
5. Molding pass: 18 passes (roll)
6. Molding frame :300H steel welding, chain drive.
7. Wall plate type wall plate thickness 16mm
8. Roller shaft diameter: ¢55mm through the shaft structure material :45# steel
Processing technology: tempering treatment, rough processing, finishing
9. Roll mold material: 45#
Processing technology: roughing, heat treatment, finishing. Quenching hardness :HRC45-50°
10. Main drive motor: 4kw
11. Host appearance: length 7.6 meters, width 1 meters, height 1 meters. It weighs about 2.5 tons
Single hook double ditch three ditch plus plate forming machine
1. Use: Cold forming machine is used for cold bending deformation of sheet metal to the required profile.
2. Function and structure: the sheet material is rolled by the 22-component mold and gradually becomes the sheet surface required by the drawing. It is composed of cycloidal motor, chain drive, transverse adjusting mechanism and roller.
3. The roller adopts 45# steel, CNC machining after quenching as a whole, hardness up to HRC45-50°, with high strength, high hardness, high precision, high service life and other advantages.
4. Host frame: integral welding, CNC machining.
5. Molding pass: 22 (roll)
6. Molding frame :250H steel, chain drive.
7. Wall plate type wall plate thickness 16mm
8. Roller shaft diameter: ¢55mm through the shaft structure material :45# steel
Processing technology: tempering treatment, rough processing, finishing
9. Roll mold material: 45#
Processing technology: roughing, heat treatment, finishing. Quenching hardness :HRC45-50°
10. Main drive motor: 4kw
11. Appearance of the host: about 9.5 meters long, about 1 meter wide, and 1 meter high. It weighs about 3.5 tons
Great Wall panel equipment
4. Host frame: integral welding, CNC machining.
5. Molding pass: 22 (roll)
6. Molding frame :250H steel, chain drive.
7. Wall plate type wall plate thickness 16mm
8. Roller shaft diameter: ¢55mm through the shaft structure material :45# steel
Processing technology: tempering treatment, rough processing, finishing
9. Roll mold material: 45#
Processing technology: roughing, heat treatment, finishing. Quenching hardness :HRC45-50°
10. Main drive motor: 4kw
11. Appearance of the host: about 9.5 meters long, 0.8 meters wide, 1 meter high. It weighs about 3 tons
(4), high pressure foaming machine (purchased)
(5) Laminate drying conveyor belt: length 23 meters (keel frame)
The double conveyor belt machine has an upper frame and a lower frame arranged in parallel, and the upper frame and the lower frame are respectively provided with an upper transmission device and a lower transmission device, with a length of 24 meters. Aluminum paper mounted electric hoist laminating machine with heating system
(6) Cut off
1. Form: flying saw cutting
2. Structural features: cut off for independent institutions, from the bottom up. The length is determined by the PLC main computer, and the cutting length can be set by itself. Flying saw cutting process, cutting end deformation is small, no burrs, blade replacement is fast, high production efficiency.
3. Cutting mode state: non-stop tracking cutting
(7) Forming machine equipment composition
The forming machine is composed of manual feeding device, chain transmission device, forming roller table and main machine, flying saw cutting system after forming, finished product supporting device, etc.
(8) Molding equipment production process
Loading (aluminum coil is loaded into the internal stay open frame to tighten) -- feed plate calibration (the steel foam plate is correctly imported into the forming machine through the feed guide platform) -- roll forming -- foam after forming ----- into the lamination dryer for drying --------- cutting saw for cutting --------- cut off the finished supporting material out of the plate
(9) Electrical control system
1. The whole machine adopts PLC control, LCD display touch screen, man-machine interface. Realize the interaction between human and PLC. The operator can automatically run (programmable control) through the set program and monitor the control process, so that the operator can control the production line and modify the control parameters, and the length of the parts can be adjusted.
2. There are two modes of operation: manual/automatic. With manual, automatic switching function: in the manual state, can carry out single operation, easy maintenance; In the automatic state, the whole line of production runs and starts in sequence; The whole line is equipped with an emergency stop button, which is easy to deal with emergency accidents and ensure the safety of equipment operators.
3. Manual operation panel is provided next to the machine.
4. Main electrical components
PLC: Three crystal inverter: three crystal
Touch screen: Three crystal encoder: Xinjie
Foam edge milling equipment
Inquiry and consulting support.
Sample testing support.
View our Factory.
Training how to instal the machine, training how to use the machine.
Engineers available to service machinery overseas
1.We can make and design all kinds of roll forming machine according to customer`s requests.
2.This is a very perfect and durable equipment. We have more than 20 years experiences.
3.This kind of machine has the best quality and the best price. It has accurate measurement and easy operating.
4.We can design and manufacture the special type machine according to the customers` requirement and we could provide technical guiding, production, installation, debugging and maintenance service to all customers.
5. Our product has been exported to many regions and won high reputation because of the high quality and reasonable price.
The business principal of cangzhou dixin roll forming machine factory is "Customer First and Faith Foremost" and what we pursue is to meet the requirements of customers and do better for them. Businessmen from at home and abroad are welcomed to our factory for business talks and work hand in hand for the prosperous future.
Our machine exported all over the world,so our customers are also from all over the word.
Sometimes some customers visit our factory before placing orders, some customers when theirs machines finished ,the come to check test machine, we also have some customers come to our factory to learn how to operate the machine, we
welcome you at any time.
Our company focus on foreign trade many years. We can supply many models of GI,GL,Tinplate,Metal roof,Roofing machine and nail making machine and they are fine in quality and beautiful in design. Recently,the price of steel products will increase,please purchase in advance if you need.We can provide you a competitive price.
Why choose us?
1. We can make and design all kinds of roll forming machine according to customer's requests.
2. This is a very perfect and durable equipment. We have more than 15 years experiences.
3. This kind of machine has the best quality and the best price. It has accurate measurement and easy operating.
4. We can design and manufacture the special type machine according to the customers' requirement and we could provide technical guiding, production, installation, debugging and maintenance service to all customers.
5. Our product has been exported to many regions and won high reputation because of the high quality and reasonable price.
FAQ
Q1:What is the MOQ?
A:For roll forming machine,the MOQ is one set.
Q2:Could you design the machine for me?
A:Yes,we have professional team of engineers and are able to design and product roll forming machine as your requestment. Or if you have own drawings,we can design it as your drawings.
Q3:Are you trading company or factory?Can we visit your factory?
A:We have our own production line and factory.Warmly welcome to our factory. Once we have your schedule, we will arrange the professional sales team to follow up your case.
Q4: What's your after-sale service?
A: We'll provide engineer overseas service to help you install and debug the machine,in addition,free replacement of parts in one year warranty.
Q5: How is your Payment Term?
A:T/T,L/C ,Western Union
Q6: What's your delivery time?
A:Normally it is about 45 days, but we will delivery as soon as possible
Q7:How about the trade terms?
A:EXW,FOB,CFR,CIF will be accepted.
Q8:Do you accept private label? Customize logo printed or package ?
A:Yes,they are all welcome as your request.
Welcome to have a visit !
We can design according to our customers' requirements and we will do our best to meet your needs.
){kind=link}