1. Product description
Light keel is a new type of building material. With the development of the modernization of the dragon, a wide range of steel-frame hotels, terminal buildings, train stations, stations, steel light, shopping malls, factories, office buildings, old building renovation, indoor Decoration settings, ceilings and other places.
The light (paint-baked) keel ceiling has the advantages of light weight, high strength, waterproof, shockproof, industrial injury, sound absorption, internal power, etc., and also has the advantages of short period and bright construction.
The keel is a high-quality continuous hot and cold bending plate and strip as the raw material, and the value of the building metal that is rolled by the process.
It is used for the decoration of non-load-bearing bodies and roofs with light board walls such as paper-faced gypsum board and decorative gypsum board. It is suitable for the modeling decoration of a variety of roofs, circular inner walls and basic materials for shed ceilings.
The light steel keel includes ceiling keel and partition keel according to the purpose, and V-shaped, C-shaped, T-shaped, L-shaped and U-shaped keels according to the cross-sectional form.
2.Product information
| NO |
Main parameter |
| 1 |
Configurations |
manual decoiler, guiding platform, main machine of roll forming, cutting device, output table, electro-motor, hydraulic station, PLC control system |
| 2 |
Processing material |
aluminium sheet/galvanized steel sheet/color steel sheet |
| 3 |
Material thickness |
0.3-0.8mm |
| 4 |
Feeding width |
according customer requirements |
| 5 |
Effective width |
according customer requirements |
| 6 |
Main motor power |
5.5kw |
| 7 |
Pump power |
4kw |
| 8 |
Shaft diameter |
75mm |
| 9 |
Forming steps |
13 steps |
| 10 |
Main frame |
300H steel |
| 11 |
Control systerm |
PLC computer control with inverter |
| 12 |
Power supply |
380V, 3 Phase, 60Hz |
| 13 |
0veral sized |
6000mm*1300mm*1300mm |
| 14 |
Total weight |
2.5 Tons |
| 15 |
Cutter material |
Cr12 mould steel with quenched treatment |
3. Specific description
(1) Manual decoiler
Un-powered, single head, max capacity: 5000kg
(2) hydraulic pump station
It is controlled by gear wheel oil pump, after filling the hydraulic oil into the hydraulic oil tank, the pump drive the cutting machine to begin the cutting job.
(3) Computer control cabinet
It adopts TaiDa PLC to control, the target sheet length is adjustable.
Computed mode has two modes: Automatic and manual.
Touch screen.
(4) Output table
It is used to load the finished sheet. This kind is convenient for shipment.
(5) Spare parts
4.Product show
5. Payment term
TT, you should pay 30% as the deposit on the order day, then pay 70% before delivery when you inspect goods well in factory or by video
7. Warranty
12 months, and lifelong technical support service
8. Installation
If you need, we will send one technician to your factory to install & testing the machine. You should assist the technician to get Visa and pay for flight tickets and local accommodation, and pay 80 USD/day for salary.
9. Package
Standard export package, water-proof package, covered with plastic film
| No. |
Name
|
Unit |
Qty |
| 1 |
Manual decoiler |
set |
1 |
| 2 |
Main forming machine |
set |
1 |
| 3 |
PLC control system |
set |
1 |
| 4 |
Hydraulic pump station |
set |
1 |
| 5 |
Post cut |
set |
1 |
| 6 |
Electric motor |
set |
1 |
| 7 |
Output table |
set |
1 |
10.products
11.contact me
){kind=link}