4meter and 6 Meter Hydraulic Bending Machine Press Brake Machine Bender

• Customization: Available
• After-sales Service: Lifelong
• Waterproof Rating: IPX-8
• Model NO.: 6m bender
• Warranty: 1-year
• Condition: New
• Certification: RoHS, ISO 9001:2000, ISO 9001:2008, CE
• Automation: Non Automation
• Suitable for: Aluminum, Alloy, Carbon Steel, Stainless Steel
• Type: Concrete Iron Prestressed Machinery
• Name: 6 Meter Hydraulic Bending Machine
• Method: Hydraulic Pressure
• Processing: Fold and Bend
• Product: Tile
• Brick Raw Material: Colored Steel
• Tolerance: 1.0mm
• Thinckness: 0.3mm-0.8 mm
• Product Name: 6 Meter Hydraulic Bending Machine
• Use: Electric
• Special: Easy Operation
• Transport Package: Water-Proof Packaging, Covered with Plastic Film
• Specification: 6 Meter Hydraulic Bending Machine
• Trademark: DX
• Origin: Botou Hebei China
• HS Code: 84552210
• Production Capacity: 20 Set Per Month
• Package Size: 50.00cm * 40.00cm * 30.00cm
• Package Gross Weight: 1.000kg

Product Description

Product Description

High-precision And Durable Hydraulic metal sheet Bending/folding Machine Is Suitable For Sheet Metal Processing To multiple profile

Hydraulic bending machine adopts an all-steel welded assembly structure, and has undergone stress treatment to ensure good rigidity and precision. The machine adopts the structure of hydraulic cylinder to control the slide block to move up and down,with fast down and fast forward control functions. The machine adopts mechanical torsion shaft or electro-hydraulic proportional valve to control the balance and synchronization of the slider. The slide rail adopts rolling or sliding, and the gap can be adjusted to make the slide move smoothly and smoothly. The machine adopts a convex, manual or pull rod type compensation table to determine the accuracy of the parts.

 

 

 

Specification

Features Of Stainless Steel Sheet Hydraulic Press Brake Metal Bending Machine:

Hydraulic bending machine suitable for the sheet bending process of electrical switch cabinets, file cabinets, kitchen utensils,car trunk decoration and other products. It can also cut carbon steel plates, stainless steel plates, aluminum plates,copper plates, etc. Generally used in conjunction with the color steel tile press.

1. Adopt all-steel welded structure, with sufficient strength and rigidity;

2. Hydraulic drive, the oil cylinders at both ends of machine tool are placed on the sliding block to directly drive the sliding work; 3. The slider synchronization mechanism adopts torsion shaft for forced synchronization; 4. Using mechanical block structure, stable and reliable; 5. The stroke of the slider can be adjusted quickly and manually, and the counter is displayed; 6. Oblique wedge-type deflection compensation mechanism to ensure higher bending accuracy.

No	Item	Data
1	Raw material width	2000 4000 6000 mm
2	Max sheet thickness	0.3-5.0 mm
3	Raw material	Color steel sheet or galvanized steel sheet
4	Angle type	90
5	Power	Hydraulic
6	Speed	15-20 times/min
7	Voltage	220/380 or customized
8	Max. torque	500N.m

Other design

Operation Precautions Of Steel Sheet Hydraulic Press Brake Metal Bending Machine: 1. During operation, the pressed workpiece should be placed in the middle and parallel to the upper and lower molds, and the cushion should be stable. During the working process of the bending machine, it is strictly prohibited to overhaul or adjust the mold.

2. When pressing long and large workpieces, two persons (or more) are required to operate. Avoid toppling when the workpiece is deformed due to the force and deformation. It is not allowed to hold the pressed workpiece at close range.

3. When calibrating or pressing the workpiece, the workpiece should be placed in the middle of the mold, and no bias is allowed. The upper die should approach the workpiece slowly to prevent the workpiece from being forced out.

4. Always check whether the strokes of the two cylinders are the same during work, otherwise adjust or report for repairs in time. When the piston of the oil cylinder is shaken or the oil pump screams, the air in the oil circuit must be discharged. 5. Always pay attention to the oil tank and observe whether the oil level is suitable. If the oil level is too high, check the oil return line and adjust the oil return valve. It is strictly forbidden to overflow the oil tank. Keep working oil temperature ≤45ºC.

6. When the control valve and safety valve fails or the safety protection device is not perfect, it is not allowed to continue working.

7. Regulating valves and pressure gauges are strictly prohibited to be adjusted by others, and the operator must tighten them after adjustment.

8. When the working pressure is too high, the oil return valve must be checked and adjusted, and work can only be carried out after the fault is eliminated.

9. It is strictly forbidden for the upper die of the hydraulic sheet metal bending machine to exceed the maximum stroke. 10. During work, it is strictly forbidden to reach into the middle of the upper and lower molds.

11. Frequently check the travel switch and safety protection device of the hydraulic sheet metal bending machine to ensure the reliable operation of the machine.

12. When adjusting the mold or overhauling, the oil pump must be turned off to ensure safety.

 

 

 

Packing & Delivery

 

Company Profile

 

02:28

02:28

Our enterprise, Cangzhou Dixin Roll Forming Machine Co., Ltd, as the professional and leading manufacturer, can manufacture, design, installation and debug various roll forming machines and metal processing sheet equipments, which produce metal roof wall panel, glazed roof tile, CZ steel purlin, floor decking, roof ridge cap, sandwich panel, roof truss, shutter panel, shutter slat, door frame, guardrail, and metal sheet uncoiler, bending, slitting, cutting, flattening, punching, crimping. Backed by reasonable design, precision machining and selected material, both our standard and customized machines are characterized by long life span, precise forming and easy operation. With our customers trust, our machines have been sent to America, Australia, Russia, India, Sri Lanka, Nigeria, Pakistan, Uzbekistan, Mozambique, Angola, Turkey, Brazil, etc. Warmly welcome to China to visit our factory and select the machines you need. Our address, Fuzhuang Industrial Development Zone, Botou City, Hebei Province, China.

FAQ

1. who are we?
We are based in Hebei, China, start from 2012,sell to Domestic Market(76.34%),Africa(7.63%),North America(5.34%),South Asia(3.05%),South America(2.29%),Mid East(2.29%),Western Europe(1.53%),Oceania(1.53%). There are total about 11-50 people in our office.

2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;

3.what can you buy from us?
CZ steel purlin machine,floor decking machine,sandwich panel production line,etal roof wall panel making machine,light steel Keel Roll Forming Machine

4. why should you buy from us not from other suppliers?
Our company is the professional and leading manufacture,can manufacture ,design,installation and debug various roll forming machines and metal processing sheet equipments ,which produce metal roof wall panel,glazed roof tile , CZ steel purlin,floor de

5. what services can we provide?
Accepted Delivery Terms: FOB,CFR,CIF,EXW;
Accepted Payment Currency:USD,EUR,CNY;
Accepted Payment Type: T/T,L/C,Credit Card,Cash;
Language Spoken:English,Chinese