Roofing Metal Sheets Roll Forming Machine Tiles Making machinery Roof Tile Making Machine
1.We are design the one unit one machine, the control box and the hydraulic station for the cutting are all
put under the bedding, when you get the machine, the machine is one unit, no need to assemble and
connect the complicate cable of the machine, you only need to connect one main cable,
2. the touch screen is hang over, it is not under the floor.
3. the accuracy of our machine is -/+0.5-1mm.
4. the roller is solid and electroplated, which will not have rust.
5. the material are all national standard and cutter will not have burr.
6. the board are all milled and polished.
7. the roller is solid and galvanized
8. the guide post have no flaw
1. Technique parameters
(1) Processing material: Aluzinc/galvanized steel/colored steel coil
(2) Material thickness: 0.3-0.8mm
(3) Effective width: 1000mm
(4) Feeding width: 1250mm
(5) Main motor power: 4 kw
(6) Pump power: 4 kw
(7) Shaft diameter: 75mm
(8) Forming steps: 13 steps
(9) Roller material: 45# forged steel, with hard chrome plating
(10) Main frame: 300H steel
(11) Medium plate thickness: 14mm
(12) Control systerm: PLC computer control with inverter
(13) Power supply: 380V, 3 Phase, 50Hz
(14) 0veral sized: 6000mm*1500mm*1500mm
(15)Total weight: 3 tons
2. Work flow
Manual decoiler- Roll forming machine- PLC control- Hydraulic system - Post cut- Stacking
3. Specific description
(1) Manual decoiler
Un-powered, single head, max capacity: 5000kg
(2) hydraulic pump station
It is controlled by gear wheel oil pump, after filling the hydraulic oil into the hydraulic oil tank, the pump drive the cutting machine to begin the cutting job.
(3) Computer control cabinet
It adopts TaiDa PLC to control, the target sheet length is adjustable.
Computed mode has two modes: Automatic and manual.
Touch screen.
(4) Output table
It is used to load the finished sheet. This kind is convenient for shipment.
(5) Spare parts
4. Payment term
TT, you should pay 30% as the deposit on the order day, then pay 70% before delivery when you inspect goods well in factory or by video
5. Warranty
24 months, and lifelong technical support service
6. Installation
If you need, we will send one technician to your factory to install & testing the machine. You should assist the technician to get Visa and pay for flight tickets and local accommodation, and pay 80 USD/day for salary.
7. Package
Standard export package, water-proof package, covered with plastic film
No. |
Name |
Unit |
Qty |
1 |
Manual decoiler |
set |
1 |
2 |
Main forming machine |
set |
1 |
3 |
PLC control system |
set |
1 |
4 |
Hydraulic pump station |
set |
1 |
5 |
Post cut |
set |
1 |
6 |
Electric motor |
set |
1 |
7 |
Output table |
set |
1 |
This is one of our main products, hotselling used in Nigeria, and has been certificated by SGS, CE.