Steel Roof and Wall Cold Roll Forming Machine
1. Machine type: Steel Roof and Wall Cold Roll Forming Machine
2. Technique parameters of the processing line
(1) Configurations: Manual decoiler, guiding platform, main machine of roll forming, cutting device, output table, electro-motor, hydraulic station, PLC control system
(2) Processing material: Aluzinc/galvanized steel/colored steel coil
(3) Material thickness: 0.3-0.8mm
(4) Effective width: 1050mm
(5) Feeding width: 1250mm
(6) Main motor power: 4 kw
(7) Pump power: 4kw
(8) Shaft diameter: 75mm
(9) Forming steps: 13 steps
(10) forming speed: 8-12m/min
(11) Roller material: High grade NO. 45 forged steel, with hard chrome plating
(12) Shaft material: High grade NO. 45 carbon wrought steel
(13) Cutter material: Cr12 mould steel with quenched treatment
(14) Main frame: 300H/U steel
(15) Medium plate thickness: 14mm
(16) Control systerm: PLC computer control with inverter
(17) Power supply: 380V, 3 Phase, 50Hz
(18) 0veral sized: 6000mm*1300mm*1300mm
(19) Total weight: About 2.3 tons
3. Processing technique and deployment
Manual decoiler- Roll forming machine- PLC system- Hydraulic system-Post cut- Stacking
Our Services
1. We provide the technical support for whole life of our machines.
2. If buyers need the technician to go abroad, we will arrange the technician, but the buyers should take all the cost, inculding visa, roundtrip ticket etc.
Material of frame |
300H steel |
Thickness of middle plate |
14mm |
Step of forming roller |
13steps |
Diameter of shaft ( solid shaft) |
75mm |
Material of shaft ( solid shaft) |
(high grade) 45# Steel |
Treatment of roller |
quenched and tempered treatment, hard chromized coated 0.05-0.07mm |
Drive type of roll forming machine |
drive by chain |
Power of main motor |
4KW |
Voltage |
380V/50Hz/3phase |
Line speed : |
about 8-12 m/min |
Motor power of hydraulic station |
4kw |
Oil pump of hydraulic station |
gear oil pump (high grade) |
Hydraulic cutting: |
cutting controlled by PLC |
Accuracy of cutting |
+/- 2mm |
Razor blades material |
Cr12, quenching 58-62 °. |
Weight of main forming machine : |
About 2.6 T |
E lectrically controlled system |
entire machine controlled by PLC |
PLC |
DELTA (TAIWAN) |
Steel Roof and Wall Cold Roll Forming Machine
Contact: Bella Hao Mobile: 008618231723279