| Tile Type: | Colored Steel |
|---|---|
| Certification: | CE, ISO |
| Condition: | New |
| Customized: | Customized |
| Usage: | Roof, Wall, Floor |
| Transmission Method: | Hydraulic Pressure |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier 
| Introduction: Sandwich panel is a compound line, contain roll forming machine and sandwich panel rolling system. The whole line is controlled by the PLC control center. The material is steel sheet coil, its thickness can be 0.4-0.6mm, width can be 1250mm, the hydraulic strength ≤235Mp. The stuffing is EPS or Rock Wool. |
|
| Technical Parameters | Sandwich panel size: Length: ≥2m Width: ≤1250mm Thickness: as per the drawing Steel sheet coil size:Stuffing material: EPS Thickness: 0.4mm-0.6mm Width≤1250mm The max weight: 5T Inner diameter of coil: 500mm and 600mm Outer diameter of coil: 1000mm Stuffing material: EPS Density≥18kg/m3, tolerance of straight≤1mm/m, arched tolerance≤3mm/m, Level tolerance≤ 1.5mm, EPS panel length≥3m. Stuffing material: Rock wool Density≥100kg/m3, Rock wool panel length≥3m. Processing speed: 1000-3000mm/min (The speed can be adjusted) The length of the whole line: 40m The available Length of sandwich panel: 7.5m Control center: PLC Power of main motor: 40kw Power source: 380V/3phase/50 Hz Air pressure: 0.7MP (you can control by yourself) The best working temperature: 25oC. Material of roller: C45steel hard chrome plating Material of blade: Cr12 |
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}